Say Plumb Copper Capillary Fittings – 15mm to 42mm

Plumbing Accessories

Say Plumb Copper Capillary Fittings – 15mm to 42mm

Product code: choose an option

Availability:

Available!

Compare

Say Plumb copper capillary (solder) fittings
Couplers, reducers, elbows, tees, crossovers, end caps and tap connectors
15mm, 22mm and 42mm

Disclaimer: Please WhatsApp our call centre to confirm current pricing and stock availability before visiting your local branch.

Price range: $0.30 through $7.44

Fitting

Size

Clear

Ask about this product on WhatsApp

Price & stock confirmedBefore you pay or travel
Delivery availableFree on orders over $500
Collect in SouthertonOpen every day

Say Plumb copper capillary fittings

Solder-type copper fittings for copper water pipe – clean, flux and heat the joint and solder flows into it. Used for geyser, hot-water and permanent concealed installations.

C = copper pipe end. MI = male BSP thread, FI = female BSP thread (to connect to a tap, valve or geyser).
Size is the copper pipe outside diameter; “15mm × ½”” means 15mm pipe to ½” thread; “22 × 15mm” reduces from 22mm to 15mm pipe.
Slip couplers have no internal stop, so they slide along the pipe – use them to repair a burst section.
Crossovers let one pipe jump over another where two runs cross.

Fitting	Sizes in stock
Straight coupler (C×C)	15mm, 22mm
Slip coupler (C×C)	15mm, 22mm
Reducing coupler (C×C)	22 × 15mm
Coupler (C×MI)	15mm × ½”, 15mm × ¾”, 22mm × ¾”
Coupler (C×FI)	15mm × ½”, 15mm × ¾”, 22mm × ¾”
Elbow 90° (C×C)	15mm, 22mm
Elbow 45° (C×C)	15mm, 22mm
Reducing elbow (C×C)	22 × 15mm
Elbow 90° (C×MI)	15mm × ½”, 15mm × ¾”, 22mm × ¾”
Elbow 90° (C×FI)	15mm × ½”, 15mm × ¾”, 22mm × ¾”
Equal tee	15mm, 22mm, 42mm
Reducing tee	22 × 15mm
Crossover	15mm, 22mm
End cap	15mm, 22mm
Tap connector	15mm × ½”, 22mm × ¾”