NUR ND3 miniature circuit breakers
NUR’s ND3 range is a standard DIN-rail miniature circuit breaker (MCB) with a 3kA breaking capacity. MCBs protect each circuit in your DB board: if a circuit is overloaded or short-circuits, the breaker trips and cuts the power. Reset it by switching it back on once the fault is fixed. The ND3 clips onto the 35mm DIN rail used in most modern DB boards and enclosures.
How to choose
- Poles. Use 1-pole for ordinary single-phase circuits: lights, plugs, geyser. Use 2-pole to switch live and neutral together, for example as a main switch or on some solar and inverter circuits. Use 3-pole for three-phase supplies and motors.
- Rating (amps). The breaker must suit the cable it protects, not just the appliance. As a rough guide, lighting circuits on 1.5mm² cable usually take 10A, and plug circuits on 2.5mm² usually take 16–20A. Always have the final choice checked by a qualified electrician.
- Replacing a breaker? Match the rating and the number of poles of the old one.
What we stock
| Poles | Rating in stock |
|---|---|
| 1-pole | 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A |
| 2-pole | 6A, 10A, 16A, 20A, 32A, 63A |
| 3-pole | 6A, 10A, 16A, 20A, 25A, 32A, 50A, 63A |
Not sure which one you need? Send us a photo of your DB board or the old breaker on WhatsApp and we’ll match it.

























There are no reviews yet.